Baicalein glycymicelle ophthalmic solution: Preparation, in vitro antimicrobial activities, and antimicrobial mechanism evaluations.

The purpose of this study was to develop a novel baicalein (BAI) loaded glycymicelle ophthalmic solution with small molecule phytochemical glycyrrhizin as nanocarriers and to explore this solution's potential as an antimicrobial agent against ocular infections. The optimized BAI glycymicelles had a high encapsulation efficiency (98.76 ±â€¯1.25 %), a small particle size (54.38 ±â€¯2.41 nm), a uniform size distribution (polydispersity index = 0.293 ±â€¯0.083), and a zeta potential of -28.3 ±â€¯1.17 mV. The BAI glycymicelle ophthalmic solution exhibited an excellent short-term storage stability. BAI glycymicelles significantly increased the apparent solubility and in vitro release capability of BAI. The BAI glycymicelle ophthalmic solution exhibited no hen's egg-chorioallantoic membrane' irritation and strong in vivo ocular tolerance in rabbits. The BAI glycymicelles noticeably enhanced the in vivo corneal permeation. The BAI glycymicelles also precipitated increased in vitro antioxidant activity and significantly improved in vitro antipathogen activities. Various antimicrobial mechanisms, including the destruction of the bacterial cell wall, damage to the bacterial cell membranes, interruptions to the biofilm structure, and the apoptosis of bacteria, were inflicted on BAI glycymicelles. These findings provided useful knowledge regarding the development of a novel ophthalmic solution and formulation of BAI.

Self-assembled sodium alginate polymannuronate nanoparticles for synergistic treatment of ophthalmic infection and inflammation: Preparation optimization and in vitro/vivo evaluation.

Frequent administrations are often needed during the treatment of ocular diseases due to the low bioavailability of the existing eye drops owing to inadequate corneal penetration and rapid drug washout. Herein, sodium alginate polymannuronate (SA) nanocarriers were developed using ionic gelation method that can provide better bioavailability through mucoadhesivity and sustained drug release by binding to the ocular mucus layer. This study disproves the common belief that only the G block of SA participates in the crosslinking reaction during ionic gelation. Self-assembly capability due to the linear flexible structure of the M block, better biocompatibility than G block along with the feasibility of controlling physicochemical characteristics postulate a high potential for designing efficient ocular drug delivery systems. Initially, four crosslinkers of varied concentrations were investigated. Taguchi design of experiment revealed the statistically significant effect of the crosslinker type and concentration on the particle size and stability. The best combination was detected by analyzing the particle size and zeta potential values that showed the desired microstructural properties for ocular barrier penetration. The desired combination was SA-Ca-1 that had particle size within the optimal corneal penetration range, that is 10-200 nm (135 nm). The drug carriers demonstrated excellent entrapment efficiency (∼89 % for Ciprofloxacin and ∼96 % for Dexamethasone) along with a sustained and simultaneous release of dual drug for at least 2 days. The nanoparticles also showed biocompatibility (4 ± 0.6 % hemolysis) and high mucoadhesivity (73 ± 2 % for 0.25 g) which was validated by molecular docking analysis. The prepared formulation was able to reduce the scleral inflammation of the rabbit uveitis models significantly within 3 days. Thus, the eye drop showed remarkable potential for efficient drug delivery leading to faster recovery.

Topical ocular administration using thermosensitive chitosan-glycerophosphate-PRP hydrogels for improved ocular bioavailability.

PURPOSE: One of the difficulties in the pharmacy field is the delivery of drugs for the eyes. Topical therapy is one of the most common methods for treating eye diseases. Due to their unique properties, including biocompatibility and suitable degradation, hydrogels are appropriate for biological purposes. Platelet-rich plasma (PRP), as a designated concentration of platelets, is in a smaller volume than the plasma and is considered a rich source of growth factor that has been used in recent years, including applications in eye diseases including corneal wound healing, improvement of dry eye and post-LASIK syndrome. METHODS: The present study was performed to fabricate Chitosan (CS) and glycerophosphate (GP) based hydrogels that are temperature-sensitive for PRP and investigate their effect on ocular stem cells. RESULTS: CS-GP-based temperature-sensitive hydrogels containing PRP were successfully fabricated using CS and GP. This hydrogel is liquid at ambient temperature and a gel at ocular temperature. Rheology, FTIR, and SEM tests assessed the properties of the hydrogels. The results of the MTT test showed that the hydrogel made with the optimal formulation was not toxic to LSC cell lines. CONCLUSIONS: Given this, CS-GP-based hydrogels can be applied as a biocompatible formulation in ocular medication administration with increased bioavailability at the ocular surface and topical delivery of PRP.

Exploring the Potential of Nanoporous Materials for Advancing Ophthalmic Treatments.

The landscape of ophthalmology is undergoing significant transformations, driven by technological advancements and innovations in materials science. One of the advancements in this evolution is the application of nanoporous materials, endowed with unique physicochemical properties ideal for a variety of ophthalmological applications. Characterized by their high surface area, tunable porosity, and functional versatility, these materials have the potential to improve drug delivery systems and ocular devices. This review, anchored by a comprehensive literature focusing on studies published within the last five years, examines the applications of nanoporous materials in ocular drug delivery systems (DDS), contact lenses, and intraocular lenses. By consolidating the most current research, this review aims to serve as a resource for clinicians, researchers, and material scientists engaged in the rapidly evolving field of ophthalmology.

Drug Delivery for Ocular Allergy: Current Formulation Design Strategies and Future Perspectives.

The incidences of ocular allergy have been growing with the increase in pollution. Because of challenges in new drug development, there have been efforts to maximize the efficacy of existing drugs through drug delivery approaches. The effectiveness of drugs in ophthalmic conditions is primarily determined by permeability across the barrier, corneal retention, and sustained release. Thus, there have been widespread efforts to optimize these parameters to enhance efficacy through novel formulations. This review aims to analyze the approaches to drug delivery systems to encourage further research to optimize effectiveness. With this objective, research on drug delivery aspects of anti-allergy therapeutics was included and analyzed based on formulation/drug delivery technique, Food and Drug Administration approval limits, residence time, compatibility, pre-clinical efficacy, and potential for translational application. Conventional eye drops have concerns such as poor residence time and ocular bioavailability. The novel formulations have the potential to improve residence and bioavailability. However, the use of preservatives and the lack of regulatory approval for polymers limit the translational application. The review may assist readers in identifying novel drug delivery strategies and their limitations for the development of effective ophthalmic formulations for the treatment of ocular allergy.

Impact of Apparatus and Adapter on In vitro Drug Release of Ophthalmic Semisolid Drug Products.

PURPOSE: In vitro release testing (IVRT) is a widely used tool for evaluating the quality and performance of drug products. However, standardized sample adaptors or drug release apparatus setups for IVRT studies are still lacking for ophthalmic ointments. The aim of this study was to provide a better understanding of the impact of apparatus and sample adaptor setups on IVRT of ophthalmic ointments. METHODS: Dexamethasone (DEX), a steroidal ingredient commonly used in ophthalmic drug products, was selected as a model drug. Ointments were prepared by mixing DEX in white petrolatum using a high shear mixer. A novel two-sided adapter was developed to increase the drug release surface area. DEX ointment was placed in one-sided or two-sided release adaptors coupled with 1.2 µm polyethersulfone membrane, and the drug release was studied in different USP apparatuses (I, II, and IV). RESULTS: The sample adaptor setups had a minimal impact on cumulative drug release amount per area or release rate while USP IV apparatus with agitated flow enhanced drug release rates. The USP apparatus I with a two-sided semisolid adapter, which uses membranes on both sides, showed dramatically higher cumulative drug release and discriminative release profiles when evaluating ophthalmic formulations. CONCLUSIONS: USP apparatuses and sample adaptors are critical considerations for IVRT. Two-sided semisolid adapter provides higher cumulative release, facilitating the discrimination between low drug content ophthalmic ointment formulations with good sensitivity and repeatability without affecting the drug release rate.

Pharmacokinetics of Sirolimus Eye Drops Following Topical Ocular Administration in Rabbits.

Purpose: To evaluate the pharmacokinetics of sirolimus eye drops following topical instillation in rabbits. Methods: The study included 2 experiments. In single-dose pharmacokinetic study, rabbits received a single bilateral instillation of 0.05% sirolimus eye drops (0.5 mg/mL, 50 µL/eye). In repeat-dose pharmacokinetic study, 0.05% sirolimus eye drops (0.5 mg/mL, 50 µL/eye/time) were instilled into both eyes of rabbits four times a day for 6 consecutive days and one time on day 7. Whole blood, tears, aqueous humor, cornea, and conjunctiva samples were collected. Sirolimus concentration was determined by a validated liquid chromatography-tandem mass spectrometry. Results: Sirolimus was hardly detected in plasma or aqueous humor after either single or repeated dosing. The Cmax of sirolimus in tears, cornea, and conjunctiva after a single instillation was 163.34 ± 69.30 µg/g, 150.56 ± 84.98 ng/g, and 113.22 ± 49.82 ng/g, respectively. As the number of instillation elevated, the Cmax of sirolimus was increased to 486.18 ± 297.93 µg/g, 418.63 ± 41.07 ng/g, and 314.25 ± 63.74 ng/g, respectively. In repeat-dose administration, the steady state of sirolimus concentration was achieved on the third day. Ocular exposure to sirolimus after single and repeated dosing, based on AUC0-t, was highest in tears, followed by cornea and conjunctiva. Compared with single administration, a significant increase in sirolimus exposure as measured by AUC0-t was observed in tears, cornea, and conjunctiva following repeated administration. Conclusions: Topical administration of sirolimus eye drops results in extensive distribution of sirolimus in tears, cornea, and conjunctiva, while aqueous humor and systemic exposure were negligible. Repeat-dose administration increases sirolimus exposure in tears, cornea, and conjunctiva.

Ophthalmic nano-bioconjugates: critical challenges and technological advances.

Ophthalmic disease can cause permanent loss of vision and blindness. Easy-to-administer topical and systemic treatments are preferred for treating sight-threatening disorders. Typical ocular anatomy makes topical and systemic ophthalmic drug delivery challenging. Various novel nano-drug delivery approaches are developed to attain the desired bioavailability in the eye by increasing residence time and improved permeability across the cornea. The review focuses on novel methods that are biocompatible, safe and highly therapeutic. Novelty in nanocarrier design and modification can overcome their drawbacks and make them potential drug carriers for eye disorders in both the anterior and posterior eye segments. This review briefly discussed technologies, patented developments, and clinical trial data to support nanocarriers' use in ocular drug delivery.

Thermo-responsive Diels-Alder stabilized hydrogels for ocular drug delivery of a corticosteroid and an anti-VEGF fab fragment.

In the present study, a novel in situ forming thermosensitive hydrogel system was investigated as a versatile drug delivery system for ocular therapy. For this purpose, two thermosensitive ABA triblock copolymers bearing either furan or maleimide moieties were synthesized, named respectively poly(NIPAM-co-HEA/Furan)-PEG6K-P(NIPAM-co-HEA/Furan) (PNF) and poly(NIPAM-co-HEA/Maleimide)-PEG6K-P(NIPAM-co-HEA/-Maleimide) (PNM). Hydrogels were obtained upon mixing aqueous PNF and PNM solutions followed by incubation at 37 °C. The hydrogel undergoes an immediate (<1 min) sol-gel transition at 37 °C. In situ hydrogel formation at 37 °C was also observed after intravitreal injection of the formulation into an ex vivo rabbit eye. The hydrogel network formation was due to physical self-assembly of the PNIPAM blocks and a catalyst-free furan-maleimide Diels-Alder (DA) chemical crosslinking in the hydrophobic domains of the polymer network. Rheological studies demonstrated sol-gel transition at 23 °C, and DA crosslinks were formed in time within 60 min by increasing the temperature from 4 to 37 °C. When incubated at 37 °C, these hydrogels were stable for at least one year in phosphate buffer of pH 7.4. However, the gels degraded at basic pH 10 and 11 after 13 and 3 days, respectively, due to hydrolysis of ester bonds in the crosslinks of the hydrogel network. The hydrogel was loaded with an anti-VEGF antibody fragment (FAB; 48.4 kDa) or with corticosteroid dexamethasone (dex) by dissolving (FAB) or dispersing (DEX) in the hydrogel precursor solution. The FAB fragment in unmodified form was quantitatively released over 13 days after an initial burst release of 46, 45 and 28 % of the loading for the 5, 10 and 20 wt% hydrogel, respectively, due to gel dehydration during formation. The low molecular weight drug dexamethasone was almost quantitively released in 35 days. The slower release of dexamethasone compared to the FAB fragment can likely be explained by the solubilization of this hydrophobic drug in the hydrophobic domains of the gel. The thermosensitive gels showed good cytocompatibility when brought in contact with macrophage-like mural cells (RAW 264.7) and human retinal pigment epithelium-derived (ARPE-19) cells. This study demonstrates that PNF-PNM thermogel may be a suitable formulation for sustained release of bioactive agents into the eye for treating posterior segment eye diseases.

Exploring the Therapeutic Potential of Cyclosporine for Ophthalmic Indications by Novel Carrier Systems.

Cyclosporine (CsA) stays the most intangible molecule holding a good history for treating several ophthalmic conditions and it even attributes to multiple off-label uses. Topical delivery of CsA is the most preferred route but owing to the molecule's physicochemical properties such as poor aqueous solubility and high molecular weight as well as its encounter with multiple barriers of eye causes hindrance for proper delivery of the molecule to the site of action. However, Restasis®, Cequa®, and Verkazia® are the marketed formulations that have been approved by U.S. Food and Drug Administration, whereas Cyclokat® and Ikervis® by the European Medicines Agency. Although these medications are in use, they are associated with severe discomfort and poor patient compliance. This review gives an overview regarding current formulations available in the market, the products in pipeline and the recent advances undertaken for improving ocular delivery of CsA for various ophthalmic indications.

In Vitro and Ex Vivo Models for Assessing Drug Permeation across the Cornea.

Drug permeation across the cornea remains a major challenge due to its unique and complex anatomy and physiology. Static barriers such as the different layers of the cornea, as well as dynamic aspects such as the constant renewal of the tear film and the presence of the mucin layer together with efflux pumps, all present unique challenges for effective ophthalmic drug delivery. To overcome some of the current ophthalmic drug limitations, the identification and testing of novel drug formulations such as liposomes, nanoemulsions, and nanoparticles began to be considered and widely explored. In the early stages of corneal drug development reliable in vitro and ex vivo alternatives, are required, to be in line with the principles of the 3Rs (Replacement, Reduction, and Refinement), with such methods being in addition faster and more ethical alternatives to in vivo studies. The ocular field remains limited to a handful of predictive models for ophthalmic drug permeation. In vitro cell culture models are increasingly used when it comes to transcorneal permeation studies. Ex vivo models using excised animal tissue such as porcine eyes are the model of choice to study corneal permeation and promising advancements have been reported over the years. Interspecies characteristics must be considered in detail when using such models. This review updates the current knowledge about in vitro and ex vivo corneal permeability models and evaluates their advantages and limitations.

The effect of charges on the corneal penetration of solid lipid nanoparticles loaded Econazole after topical administration in rabbits.

Fungal keratitis is an infectious disease caused by pathogenic fungi with a high blindness rate. Econazole (ECZ) is an imidazole antifungal drug with insoluble ability. Econazole-loaded solid lipid nanoparticles (E-SLNs) were prepared by microemulsion method, then modified with positive and negative charge. The mean diameter of cationic E-SLNs, nearly neutral E-SLNs and anionic E-SLNs were 18.73±0.14, 19.05±0.28, 18.54±0.10 nm respectively. The Zeta potential of these different charged SLNs formulations were 19.13±0.89, -2.20±0.10, -27.40±0.67 mV respectively. The Polydispersity Index (PDI) of these three kinds of nanoparticles were all about 0.2. The Transmission Electron Microscopy (TEM) and Differential Scanning Calorimetry (DSC) analysis showed that the nanoparticles were a homogeneous system. Compared with Econazole suspension (E-Susp), SLNs exhibited sustained release capability, stronger corneal penetration and enhanced inhibition of pathogenic fungi without irritation. The antifungal ability was further improved after cationic charge modification compared with E-SLNs. Studies on pharmacokinetics showed that the order of the AUC and t1/2 of different preparations was cationic E-SLNs > nearly neutral E-SLNs > anionic E-SLNs > E-Susp in cornea and aqueous humor. It was shown that SLNs could increase corneal penetrability and ocular bioavailability while these capabilities were further enhanced with positive charge modification compared with negative charge ones.